Marine Paint 4 Litre BLACK - Brush, Roll or Spray

Looking for high-quality marine paint that will give your boat or watercraft superior protection against the harsh elements of saltwater and sunlight? Look no further than Crystal Paints Marine Paint!

Our customers have raved about the exceptional performance and durability of our marine paint, which is specifically formulated for the unique challenges of boating and watercraft. With a range of colours to choose from, you can customize the look of your boat while ensuring it stays protected for years to come.

Crystal Paints is a specialty paint maker based in Australia, known for our commitment to quality and customer satisfaction. Our marine paint is proudly made in Australia and trusted by boat owners and professionals alike.

The beauty of this marine paint is that it can be applied with a brush, roller, or spray gun, and the quick-drying formula makes the painting process faster and more convenient.  Save time and money as no top coat or undercoat is required in most cases.

It gives a smooth even finish, with a gloss appearance.  You can use it on both exterior and interior surfaces.

• Coverage is approximately 9-12 square meters per litre, depending on the application.
• Suitable for timber, aluminium and fibreglass
• Easy to use brush, roll or spray
• Interior or Exterior
• Recoat time is 2-4 hours depending on weather conditions
• For thinning and cleaning up use only mineral turps.
• 1 PAC POLYURETHANE no top coat or undercoat needed (unless bare - see below)
• Do not paint if the temperature is less than 12çc

Timber - Bare timber should be sealed with the appropriate primer. Fibreglass - Should be sanded back to a solid surface and can be painted without a primer again, please try a small test patch first. Steel - Bare should be primed with Crystal Marine Red & Grey Phosphate Primer.

Aluminium - May be painted after sanding. Use an etch primer on bare aluminium. Coverage is approximately 9 -12 square metres per litre depending on the application.

Fibreglass - Should be sanded back to a solid surface and can be painted without a primer again, please try a small test patch first.

Steel - Bare should be primed with Crystal Marine Red & Grey Phosphate Primer. Aluminium - May be painted after sanding. Use an etch primer on bare aluminium.

Marine paint can be easily sanded and we recommend fine sanding between coats. « For thinning and cleaning up use only mineral turps.

As most boats have already been painted previously, we strongly recommend that you try a test patch first to check that your preparation is correct for the surface. If you don't know what has been applied before and it is best to check first.